1.What is the fish bite alarm?

Fishing alarm (fish bite alarm) is an electronic product that replaces fish bells. Due to the existence of traditional fish bells during use: the sensitivity is not enough, it is easy to be affected by the wind to produce false alarms, the sound is too small, and there is no luminous indication and it is not conducive to night fishing. It needs to be re-installed every time the rod is thrown, and it is easy to hang the line when fishing. The fishing alarm is produced for the above shortcomings. The fishing alarm is just a product similar to a "fish float" to alert the angler of fish news. It is not an automatic fishing machine that replaces the angler for fishing, so it will not deprive the angler of the pleasure of fishing.

2.The feature of Switch type fishing alarms

Switch type fishing alarms are divided into magnet (reed switch) type, micro switch type, mercury switch type, and other switches. The principle is that after the fish pulls the line, the switch is triggered. After the switch is closed (representing "fishing"), the circuit is turned on and an alarm is issued to alert the angler; the switch is normally off (representing "no fish"), and the circuit is disconnected without alarm.

  1. The disadvantage is that this kind of fishing alarm only has two states of "on" and "off". The transitional state of the fish hitting the hook and not completely swallowing the hook cannot be expressed, which reduces the fishing alarm. In addition, due to the structural characteristics of most such fishing alarms, the sensitivity is either too low, and the smaller fish information cannot be transmitted in time, or the sensitivity is too high, and the interference of a little wind, water, or small fish will alarm. , Causing a lot of false alarms.
  2. The advantages are simple structure and low price.

3.The feature of sensor type fishing alarm

The sensor type fishing alarm is an angle sensor type fishing alarm.

Angle sensor fishing alarm is characterized in that after fishing, the fishing line or loop drives the angle sensor to rotate, and the built-in microprocessor collects the rotation angle and speed of the angle sensor in real time, so as to obtain the strength, speed, and displacement of the fishing line and other accurate data.

  1. The disadvantage is that the structure is complex and the product cost is slightly higher.
  2. The advantage lies in its high sensitivity to feel the real-time movement of the fishing line. The angler can set the alarm sensitivity according to the target fish, wind, water, etc. of the fishing field to alarm, which eliminates interference and increases the fun of fishing.